- Evidence for helical microstructure of aragonite fibers in pteropod shells
- Helical microstructures in molluscan biomineralization are a biological example of close packed helices that may form from a colloidal liquid crystal precursor in a twist–bend nematic phase
- SrFe12O19/CoFe2O4 magnetic composites: Nanoparticle size and effect of annealing temperature on magnetic properties
- Synthesis and Properties of the Gallium-Containing Ruddlesden-Popper Oxides with High-Entropy B-Site Arrangement
- The possibilities of GPF Surface modification in the aspect of micro-contaminants removal
- Evaluation of phase stability and diffusion kinetics in novel BCC-structured high entropy alloys
- Accumulation and Emission of Water Vapor by Silica Gel Enriched with Carbon Nanotubes CNT-Potential Applications in Adsorption Cooling and Desalination Technology
- Ion distribution in iron oxide, zinc and manganese ferrite nanoparticles studied by XPS combined with argon gas cluster ion beam sputtering
- Ribs of Pinna nobilis shell induce unexpected microstructural changes that provide unique mechanical properties
- Magnetic interactions in SrFe12O19/CoFe2O4 composite: Influence of ball milling frequency and annealing temperature
- Obtaining Niobium Nitride on n-GaN by Surface MediatedNitridation Technique
- Canted antiferromagnetic order in EuZn2As2 single crystals
- Interplay between extended s-wave symmetry of the gap and spin-orbit coupling in the low electron concentration regime of quasi-two-dimensional superconductors
- NeuromorphicLiquids,Colloids, and Gels:A Review
- Communication, Information, Energy, and Music
- Electrical frequency discrimination by fungi Pleurotusostreatus
- Controlling Andreev bound states with the magnetic vector potential
- Impact of chemical segregation on magnetic anisotropy of iron oxide films
- SrFe12O19/CoFe2O4 magnetic composites: Nanoparticle size and effect of annealing temperature on magnetic properties
- Anomalous luminescence properties and cytotoxicity assessment of Sr3(PO4)2 co-doped with Eu2+/3+ ions for luminescence temperature sensing
- A New Look at Molecular and Electronic Structure of Homoleptic Diiron(II,II) Complexes with N,N-Bidentate Ligands: Combined Experimental and Theoretical Study
- Enhanced Assembly of Ag Nanoparticles for Surface-Independent Fabrication of Conductive Patterns
- Thermal Decomposition Pathways of ZnxFe3–xO4 Nanoparticles in Different Atmospheres
- Simple approach for determining center shift of Mössbauer spectra: Exemplified in two cases
- Further evidence on the effect of magnetism on lattice vibrations: The case study of sigma-phase Fe0.525Cr0.455Ni0.020 alloy
- SI-ATRP on the lab bench: A facile recipe for oxygen-tolerant PDMAEMA brushes synthesis using microliter volumes of reagents
- The effect of the topmost layer and the type of bone morphogenetic protein-2 immobilization on the mesenchymal stem cell response.
- Molecular insights into the self-assembly of hydrophobically modified chondroitin sulfate in aqueous media
- Tailoring of Optical Properties of Methacrylate Resins Enriched by HPHT Microdiamond Particles
- Low roughness, elevated stiffness and thickness-modulated surface nanocomposites based on the controlled deposition of polystyrene nanoparticles
- Theory of scanning gate microscopy imaging of the supercurrent distribution in a planar Josephson junction
- On the crystallography of the Mg–Si–Al nitride nuclei and of the graphite/nitride interface in spheroidal graphite iron
- Nanoscale MRI for Selective Labeling and Localized Free Radical Measurements in the Acrosomes of Single Sperm Cells
- Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties
- Domain structure of pseudosymmetric η”-ordered Cu6Sn5 by EBSD analysis
- Microstructure evolution in Inconel 718 produced by powder bed fusion additive manufacturing
- Effect of Mo on phase stability and properties in FeMnNiCo high-entropy alloys
- Titania coating formation on hydrostatically extruded pure titanium by micro-arc oxidation method
- Microstructure, Mechanical Properties, and Martensitic Transformation in NiTi Shape Memory Alloy Fabricated Using Electron Beam Additive Manufacturing Technique
- Long-term in vitro corrosion behavior of Zn-3Ag and Zn-3Ag-0.5Mg alloys considered for biodegradable implant applications
- Influence of low-temperature heat treatment on microstructure and mechanical properties of hydrostatically extruded titanium
- Effect of GA+ ion beam on the stability of retained austenite in high carbon steel
- Deformation modes investigation during ex-situ dwell fatigue testing in a bimodal near-α titanium alloy
- Effect of tribo-layer developed during turning of Ti–6Al–4V ELI alloy on its low-temperature gas nitriding
- Tropaeolin OO as a Chemical Sensor for a Trace Amount of Pd(II) Ions Determination
- One-Step Preparation of Highly Stable Copper–Zinc Ferrite Nanoparticles in Water Suitable for MRI Thermometry
- Working electrode geometry effect: A new concept for fabrication of patterned polymer brushes via SI-seATRP at ambient conditions
- Indium (II) Chloride as a Precursor in the Synthesis of Ternary (Ag–In–S) and Quaternary (Ag–In–Zn–S) Nanocrystals
- Zero waste, single step methods of fabrication of reduced graphene oxide decorated with gold nanoparticles
- Effect of Y2O3 additive on morphology and phase composition of zirconia solid solutions
- Hydrogen evolution reaction (HER) activity of conical Co–Fe alloy structures and their application as a sensitive and rapid sensor for H2O2 detection
- Solution combustion synthesis as an alternative synthesis route for novel Ni-Mg-Al mixed-oxide catalyst for CO2 methanation
- Quantitative Microstructural Characterization of Precipitates and Oxide Inclusions in Inconel 625 Superalloy Additively Manufactured by L-PBF Method
- Reversible cation-mediated anionic redox in defect spinel structure for high power batteries
- KNOWM memristors in a bridge synapse delay-based reservoir computing system for detection of epileptic seizures
- Supercapacitance in graphene oxide materialsmodified with tetrapyrrole dyes: a mechanisticstudy
- Scale mass gain, morphology and phase composition of air and steam oxidized electron beam melted and cast Ti–48Al–2Nb-0.7Cr-0.3Si alloys
- Influence of Doping on the Topological Surface States of Crystalline Bi2Se3 Topological Insulators
- Superconductivity in high-Tc and related strongly correlated systems from variational perspective: Beyond mean field theory
- A novel approach for nondestructive depth-resolved analysis of residual stress and grain interaction in the near-surface zone applied to an austenitic stainless steel sample subjected to mechanical polishing
- Enhanced mechanical performance and wettability of PHBV fiber blends with evening primrose oil for skin patches improving hydration and comfort
- Prenormative verification and validation of a protocol for measuring magnetite-maghemite ratios in magnetic nanoparticles
- Reversible Cation-Mediated Anionic Redox in Defect Spinel Structure for High Power Batteries
- Gallic Acid as a Potential Green Corrosion Inhibitor for Aluminum in Acidic Solution
- Indium(II) Chloride as a Precursor in the Synthesis of Ternary (Ag–In–S) and Quaternary (Ag–In–Zn–S) Nanocrystals
- Ribs of Pinna nobilis shell induce unexpected microstructural changes that provide unique mechanical properties
- Unraveling the nature of sulfur-bearing silicate-phosphate glasses: Insights from multi-spectroscopic (Raman, MIR, 29Si, 31P MAS-NMR, XAS, XANES) investigation
- Effect of polycation nanostructures on cell membrane permeability and toxicity†
- Recognition of Musical Dissonance and Consonance in a Simple Neuromorphic Computing System
- Current–voltage characteristics of strained, highlyunderdoped LaSrxCuO4 thin films